Bambu Lab H2C Induction Hotend (Right) Nozzle Type and Size:Hardened Steel Nozzle 0.8mm

Bambu Lab H2C Induction Hotend (Right) Nozzle Type and Size:Hardened Steel Nozzle 0.8mmMulti Material Printing with Less Waste The Vortek System uses up to six interchangeable induction heated hotends to achieve true multi material printing with significantly reduced purge waste compared to single nozzle systems. The hotend swap mechanism eliminates purge flushing during filament changes (H2C under 7 filaments), saving both material and time. Fast and Precise Induction Heating The Vortek Induction Hotend rapidly heats the nozzle to

5 mm Overall Length (AP3X™) 14

high-accuracy results Data archiving Not good to track Data is documented and is to be used to compare in the follow-up assessment Rework rate 15 ~ 20% < 3% Patient experience Messy and traumatic Clean and comfortable Time per step

An Endless PLA filament that glows under black light

there may be some color deviation between the actual image and the lithophane prints

• 6 Independent Axis and 5 DoF

With minimal layer lines

From our customers

Exposure Time: 5

- BT3-8 Screw*6

Spring loaded to keep the boot hooked onto the hot block at all times

EinScan Medixa streamlines workflows for O&P clinicians

No cleaning required