Maxwell Super Capacitor 16V 500F - Bare Caps (USED) Plug

Maxwell Super Capacitor 16V 500F - Bare Caps (USED) PlugThe reason for bringing these in is for the fellow DIY minded folks, , these can be cut down the middle to achieve a squarish block @ 3x3 config vs the 1x6 config. (long narrow). Once the middle aluminum busbar has been cut u can bend it up slightly by a few degrees and drill a 6mm hole on both cut ends. Then get yourself a piece of say 20m x 3mm aluminum flat and again drill them 6mm holes and use an m6 bolt to bolt it together, otherwise TIG weld

Weight: 455g

Please select local pickup

This motor is designed specifically to be used with our Hobie Motor Mount and fits easily through the Mirage Drivewell

These battery trays will suit our 12v 110ah and all other smaller batteries

Weight : 7

time and current rate of charge

excellent low internal resistance

and will STOP charging when battery is below 13

temperature

Cycle life 3000 (at 1C )

com/groups/SuperCapAustralia/permalink/565682030708838/

35mm All Lugs to suit